4 Steps To Pump Water Out of a Basement

3/9/2021 (Permalink)

A flooded basement is a problem that you need to remedy quickly.

4 Steps To Pump Water Out of a Basement

Whether you are the victim of a storm or broken pipe, a basement flood is always a source of trouble. Once the source is remedied, you need to pump out the water quickly. While you can hire a water remediation company to do this task, it could take a few days before they reach you if the flooding is widespread. The good news is you can do this task by yourself. While it is not very difficult, there are a few steps you need to follow to do it correctly.

1. Ready the Area
Wait until the source is remedied. If there is standing water around your home in Seattle, WA, don't start pumping yet. When it's time to pump, make sure you turn the electricity off. Be sure to remove children and pets from the basement as well.

2. Pump Out the Water
If your basement flood is severe, lower a sump pump into the deepest part with a rope. If you only have a few inches of water, don rubber boots and place the pump in the deepest spot. Once you set the pump up, plug it into a generator. It should start pumping water out immediately. You can speed up the process by using multiple pumps. After the water level starts to dwindle, turn off the pumps.

3. Shop-Vac Small Puddles
When the basement flood has been reduced to less than an inch, use a shop-vac to clear up the puddles. These machines suck up the water and pump it into a four- or five-gallon tank. When the tank is filled, you carry it outside and dump it out. Therefore, you want to wait until the water level is low to use this tool.

4. Dry Out Porous Items
If the source is listed under your homeowner's policy, your insurance coverage will pay to replace your porous items. This includes drywall and carpeting. Another option is to hire a company to dry the items.
A flooded basement is a problem that you need to remedy quickly. Follow these steps to pump all of the water out of your basement.